Accessories

Ingelyt can offer different models according to your needs: Lockers with one door leaf, with two door leafs, with two door leafs Z shape, with four door leafs, locker with or without door leafs, etc. All with standard dimensions, but they are made to measure. 

For installation in changing rooms of clean areas, an upper lining will be made (straight or inclined) up to the ceiling and down to the floor, using the same Tecnipure panel and aluminium profiles.

Used in classified changing rooms as a psychological barrier to separate between the “dirty” and  “clean” zone.

Can be made of stainless steel, phenolic resin compact and stainless profiles or made in situ, to measure, built with the same Tecnipure panel and aluminium profiles.

• It is possible to install removable panels for entrance and exit of machinery. These panels have the same features (exterior finishing, thickness…) than the normal panels, but they are equipped with a special piece that allows the removal without affecting roofs and other building elements.
  Such panels are widely used as a provision in areas with equipment or machines that maybe have to be removed in certain moments for maintenance or repair and due to their volume, it is impossible to do that across the door.
  
  
• There is also the option of installing technical panels in those rooms, where you need to hide a large number of installations.
  Just as in the previous case, these panels have the same features as the normal panels, but they have an aluminium tube inside, providing a space of 96 x 41 mm to pass electric cables or fluids, that cannot pass through the connecting tube between the panels, due to their higher volume.

• Boxes made of compact Tecnipure resin panels, for material transfer between the rooms.
  
  
• It is possible to make these boxes with double interlocked door in order to control the opening of the doors. Furthermore, the doors can be equipped with an inflatable seal for environments with maximum tightness requirements.
  
  
• Another possibility is to install ultraviolet light and air impulse for positive pressure.

• Commonly used to protect the panel in areas of frequent passage of trolleys, lifting cars, forklifts, rooms where machinery will be moved, passageways, as protection of columns, corners…
  
  
• We have two types of protections at your disposal:
  
  
• Stainless rounded tube protections: made of rounded tube and with dimensions according to the requirements of each project.
  
  
• Acrovynilic resin protections: made of acrovinylic resin with high impact resistance.
  We can offer a wide range of colours and modalities.

• Installation of strip curtains to isolate classified areas
  
  

  

  

• Installation of special gullies for clean rooms, with single or double drain trap.
  
• Tights, with demountable cover for perfect cleaning.
  
• Stainless finishing.